BCTYT - MIL-C-83360,CLNG & LUB CMPD.ELEC CONTACT
- MSDS: BCTYT
- Manufacturer: TECH SPRAY INC
- Product Name: MIL-C-83360,CLNG & LUB CMPD.ELEC CONTACT
- National Stock Number: 6850-00-003-5295
Product Identification
Product ID:MIL-C-83360,CLNG & LUB CMPD.ELEC CONTACT
MSDS Date:01/01/1985
FSC:6850
NIIN:00-003-5295
MSDS Number: BCTYT
Responsible Party
AMARILLO, TX 79105
US
Emergency Phone: 806-372-8523
Info Phone: 800-692-4677 OR 800-858-4043
Cage: 54700
Contractor
Telephone: 806-372-8523
Cage: 54700
Ingredients
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113) (SARA
CAS: 76-13-1
RTECS: KJ4000000
Fraction By Weight: 65.0%
OSHA PEL 1000PPM/1250STEL
ACGIH TLV: 1000PPM/1250STEL9192
SILICONE FLUID
RTECS: VW1620000
Fraction By Weight: 5.0%
DICHLORODIFLUOROMETHANE (SARA III)
CAS: 75-71-8
RTECS: PA8200000
Fraction By Weight: 30.0%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:AT HIGH VAPOR LEVELS,MAY PRODUCE ANESTHESIA
First Aid
First Aid:REMOVE PATIENT FROM AREA OF HIGH CONCENTRATION
Fire Fighting
Flash Point:NONE
Extinguishing Media:N.A.
Accidental Release
Spill Release Procedures:MOP ON WIPE UP WITH SOLVENTS,THEN CLEAN WITH
DETERGENT & WATER.
Handling
Handling and Storage Precautions:WEAR SAFETY GLASSES,WORKING GLOVES.DO
NOT DROP OR STORE IN AREAS WHERE TEMPERATURE WILL EXCEED 120F.KEEP
OUT OF REACH OF CHILDREN:CAN IS UNDER PRESS.
Other Precautions:DO NOT STORE NEAR HEAT & OPEN FLAME.EXPOSURE TO
TEMPERATURES ABOVE 120F MAY CAUSE BURSTING.AVOID PUNCTURING OF
CANS. AVOID BREATHING VAPORS IN CONCENTRATIONS OVER 1000 PPM. KEEP
OFF SKIN.
Exposure Controls
Respiratory Protection:NONE
Ventilation:AS REQUIRED TO CONTROL TLV IN AIR.
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
THE ITEM IS TYPE I IN THE MIL-C-83360 SPECIFICATION
Chemical Properties
HCC:V2
NRC/State Lic Num:NOT RELEVANT
Boiling Pt:B.P. Text:116F
Vapor Pres:0
Spec Gravity:1.420
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID-ETHERAL ODOR
Percent Volatiles by Volume:99.9
Stability
Stability Indicator/Materials to Avoid:YES
HOT METALS,ELECTRIC ARCS, OPEN FLAMES
Stability Condition to Avoid:HOT METALS,OPEN FLAMES,WELDING ARCS
Hazardous Decomposition Products:HYDROGEN CHLORIDE,PHOSGENE,HYDROGEN
FLUORIDE
Disposal
Waste Disposal Methods:DO NOT INCINERATE OR PUNCTURE EMPTY CAN. DUMP
INTO AN APPROVED LANDFILL SITE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.